| | Two-stage / with cord, plug, and      switch | 
 
 |  | |  | ULVACKIKO's Direct-Drive Oil-Sealed Rotary Vacuum Pumps aretheslidingvane "Gaede Type". Oil is used to lubricate therotarymechanismand to seal the vacuum pumping chamber,producingexcellent vacuumstability and reliability. Smalldirect-drive pumpsfeature fasterstart-up and quicker pump downcompared tobelt-driven pumps. Inaddition, ULVAC KIKO 's G-SeriesOil-SealedRotary Vacuum Pumps arecost-effective and operatequietly. 
 G-Series pumps are available in single and dual stageversionswithpumping speeds ranging from 5 L/min.to100L/min..
 | 
 | 
 
 |  Specifications | 
 | |  | Unit | 50Hz | 60Hz |  | ActualPumpingSpeed | L/min. | 10 | 12 |  | Ultimate pressure | Pa | 1.3 |  | Motor |  | Single phase,220V,60W,4 poles,capacitor run |  | Full load current | A | 0.52 | 0.56 |  | Oil capacity | mL | 250 |  | Recommended oil |  | SMR-100 |  | Weight | kg | 5.5 |  | Inlet, outlet pipe diameter | mm | O.D. dia.18 x I.D.dia.14 |  | Ambient operation temp.range | °C | 7 – 40 |  | Dimensions | mm | 130(W) x 228(L) x 165(H) | 
 | 
 
 |  Caution | 
 | 1. | Ensuretheproper oil level and oil condition are maintainedatalltimes. |  | 2. | Beforestopping a pump it should be vented to atmospheretoprevent theback-streaming of oil. (Contact your localsalesrepresentative forapplications assistance.) |  | 3. | Whenoperating a pump for long time above 0.1MPa, it ispossiblethatoil mist be exhausted from the exhaust port.Installation ofOilmist trap (OMT Series) will eliminate thispotential sourceofcontamination. |  | 4. | Oil-sealedrotary pump is not recommended forcontinuousoperation nearatmospheric pressure. | 
 
 |  Outlinedrawing | 
 |  Pumping      SpeedCurves | 
  
 
 |  Option | 
 Optionalsuctionport
 | |  | Size | Note |  | Suctionpipeforhose | Dia.12 | Attachedtostandardtype |  | Suctionpipeforhose | Dia.8 | Option |  | Suctionpipeforhose | Dia.15 | Option |  | Suctionpipeforhose | Dia.18 | Option |  | Suctionpipeforhose | Dia.22 | Option |  | KF-25 suctionport | KF-25XM20 | Option |  | A typesuctionpipe | PT1/4-L20,male | Option |  | B typesuctionpipe | PT1/4-L20,female | Option |  | C typesuctionpipe | PT1/4-L10,male | Option |  | Suctionpipewithfilter | Dia.9 | Option | 
 | 
 Optional exhaust port
 
 | |  | Size | Note |  | Exhaust port cap | - | Attachedtostandardtype |  | Exhaustpipeforhose | Dia.12 | Option |  | Exhaustpipeforhose | Dia.15 | Option |  | Exhaustpipeforhose | Dia.18 | Option |  | KF-16 exhaustport | KF-16 | Option |  | KF-25 exhaustport | KF-25 | Option | 
 | 
 Trap for exhaust side
 
 | |  | Model | Note |  | Oil-mist trap | OMT-050A | Option | 
 | 
 
 
 |  Optionalvoltage | 
 | Voltage | Applicable Volt | CE Marked | CSA Marked | cTUVusMarked |  | Singlephase,100V | Standard |  |  |  |  | Singlephase,110V(60Hz) |  |  |  |  |  | Singlephase,115V(60Hz) |  |  |  |  |  | Singlephase,120V(60Hz) |  |  |  |  |  | Singlephase,200V |  |  |  |  |  | Singlephase,230V(50Hz) |  |  |  |  |  | Singlephase,240V |  |  |  |  | 
 |