SPECIFICATIONS| Model | KDF-1700 |
|---|
| External dimensions | 560W - 830H - 630D mm |
|---|
| Furnace dimensions | 200W - 230H - 260D mm |
|---|
| Power requirements | AC200V, single phase, 50/60 Hz, 6 kW max. |
|---|
| Max. temp. | 1700ºC |
|---|
| Ordinary temp. | 1600ºC |
|---|
| Temp. range | 600ºC - 1700ºC |
|---|
Max. temp.
up time | approx. 35 min. up to 1700ºC from normal temp. |
|---|
| Tem. control | P.I.D. control, 3 sets of auto.tuning |
|---|
| Temp. sensor | JIS-B type T/C |
|---|
| Heater material | Molybdenum disulfide
( Khantal heating element ), 10 pcs. |
|---|
| Heat insulator | Ceramic fiber |
|---|
| Program volume | 7 patterns and 20 segments per pattern |
|---|
| Safety devices | Door lock, Lekage breaker, Over heat temp. detector, Thermal fuse, Automatical cooling fan after power off, T/C breakdown, abnormal heat up. |
|---|
| Alarm display | T/C break down, Heater breakdown,
Themal fuse breakdown, Over heat temp. |
|---|
| External output | 5 kinds of output for programable event,
Alarm contact output, Selection of opration on or off in the power momentary stop,
Contact output in the leakage breaker operation |
|---|
| OPTIONALS| Temp. recorder |
|---|
| 1 pen recorder (100 mm width) | | Input | for B-type T/C |
|---|
| Range | 400ºC - 1800ºC |
|---|
| Gas injection unit |
|---|
Auto program control, Attached gas flow merer
(Specified items: name of gas, amount of flowing) | | Exhaust outlet |
|---|
Necessary Inside diameter: 20 mm
( on the top board ) | | Accessory | Instruction manual, 1 booklet |
|---|
|