Model | AW62 |
|---|
 Performance
|
Washing Type | Tow Direction, Top and Bottom, Pressurized Water Jet Type,FixedJet Nozzle |
(Exchangeable to Jet Rack) Rack Spinning Type |
Washing Cycle | Wash (0 to 30min.) Settable |
Rinse (0 to 30min.) Settable |
Final Rinse (Option) (Connect with Pure Water Supplier) |
Washing by Pure Water 20L |
The above process can be selected by the way of operator’sownusage. |
Supplying Water Temp. | Room Temp. to 60oC |
Washing Temp. | 45 to 80°C |
Hot Water Supply System | Heater Heat-up (Built-in: 6kW) |
Supplying Water Pressure | 0.1 to 0.3Mpa |
Container Stand | Spinning Table (Standard), (Racks are Option) |
Water Supplying System | Electromagnetic Valve Open/Close, Water Flow amount is fixedbyLiquid Surface Control Switch |
Water Drain Type | Natural Drainage by Level Gap |
Components |
Exterior | Steel Plate, Melamine Resin Paint |
Interior | Stainless Steel |
External Dimensions | W600 x D620 x H940mm |
Inner Dimensions | W560 x D600 x H570mm |
Spinning Table | Φ550mm (Max. Load 25kg) |
Pump | Three-phase, AC200V, 250W |
Door | Up/Down, Open/Close Type (Stop at Desired Position) |
Weight | Approx. 90kg |
Power | Three-phase, AC200V, 50/60Hz, 30A |
Accessory |
Supply Hose (with Coupler) | 2m, 1pc. |
Drain Hose | I.D. 25.4mm, 2m, 1pc. |
Vinyl Cover |
Amorphous Phosphorus Detergent | 1kg |
Main Jet Nozzle Washing Brush | 1pc. |
Water Supply Port Unit | |