YAMATO鼓风干燥箱（高效节能型）

High-performance,energy-saving, programmbleconstanttemperature, forced convectionovens with air velocitycontrolandexhaustdampers.高效，节能，程序化恒温控制，送风烘箱配有空气流速控制和废气阀和以前的型号相比，该系列实现节能30％－40％。使用数字设定的控制器，风速可以按照10个挡变换。在主体的前面装上滑动触头式的开关调整旋钮，机器的可操作性被提高了。

Theyachieveanenergy-saving rate of 30 to 40% compared to previousmodels.Airvelocity can be changed in 10 stages using the digitalsettingofthe controller. Operability has been enhanced bylocatingaslider-type open/close adjustment knob on the front sideofthemain unit.

• Special constructionmakesitdifficult for dust from surrounding environment toentertheoven.
• Temperaturesettings,measurementtemperatures, over-heating preventiontemperaturesettings aredisplayed simultaneously with the digitalsetting anddisplaysystem.
• Programmable operationenablesamaximum of 32 steps repeat and graduated operation.
• Calibrationoffsetting,timer,integrated time calculation and other addedfunctions.
• Comprehensivesafetyfeatures.
• A recorder can beequippedasoption.
• 特别的结构使得周围环境中的灰尘很难进入到烘箱内部。
• 温度设定，温度测量，过热保护温度设定被同时显示。
• 程序化的操作最多能进行32部重复或者阶段性的操作。
• 校正弥补，计时器，整体时间计算和其他附加功能。
• 大量的安全特性。
• 记录仪选装。

	DNF400	DNF410	DNF600	DNF610	DNF810	DNF910
Performance
Circulation method	Airvelocity control, Forced air circulation(with manualslidetypeexhaust damper)
Operatingtemperature range	Roomtemp. +10 to 260°C
Temp.adjustment accuracy	±0.5°C (at 260°C)
Temp.distribution accuracy	±2.5°C (max. air velocity, at 260°C)
Max.temp.reaching time	Approx. 75 min.				Approx.60min.	Approx.75min.
Components
Interior/Exterior material	Stainless steel SUS 304/Electro-galvanized steel sheetwithepoxyand melamine resin baking finish
Heatinsulating material	Glasswool
Heater	Stainless pipe heater, 1.25 kW		Stainless pipe heater, 1.5 kW		Stainlesspipeheater, 1.35 kW×2	Stainlesspipeheater, 1.65 kW×2
FanType	Scirocco fan
Motor	DC24V, Brushless motor (800～1,500rpm) variable type(10steps),50W					50W×2
Cablehole/Air in-take hole	30mmI.D. (the right side) each 1pc.
Exhaustport	50mmI.D.×1 pc. (the back)					50mmI.D.×2pcs.(the back)
Controller
Temp.controller	PlDcontrol by microprocessor
Temp.setting method	Digital setting by key
Tempdisplay method	Digital display by Orange LED (4 digit)
Timer/Min.division	0min.to 999 Hrs. 59 min. /1 min.
Operationfunction Program mode	Fixedtemperature operation, Program operation,Autostart,Auto-stop, Program operation; Maximum 32 steps, Repeat function
Additionalfunctions	Timer(Total operating hours : max. 49,999 Hrs.),Calibrationoffsetfunction, Time display, Fan stop
Heatercircuit control	Triaczero-cross control
Sensor	K-thermocouple
SafeDevice
Safetycountermeasures	Selfdiagnosis functions (temp. sensor abnormal,Heaterdisconnection,SSR- short, Main relay abnormal,Automaticoverheating prevention),Key lock function, Independentoverheatprevention, Electricleakage breaker with overcurrentprotection
Standard
Internaldimensions (W×D×Hmm) External dimensions(W×D×Hmm) Internal capacity	450×450×450 580×646×860 90 liters		600×500×500 730×696×910 150 liters		600×500×1,000 730×696×1,675 300 liters	1,090×500×1,000 1,220 ×696×1,675 540 liters
Shelfplatewith standard load	Approx. 15kg/piece
Shelfreststep number	11steps		13steps		29 steps	29 steps
Shelfrestpitch	30mm
Powersource 50/60Hz	AC 100V single phase 13.5A	AC200V/220V single phase 7A/6.44A	AC 100V single phase 16A	AC200V/220V single phase 8A/7.3A	AC 200V/220V single phase 15A/13.6A	AC 200V/220V single phase 18A/16.4A
weight	Approx. 61 kg		Approx. 77 kg		Approx.113kg	Approx.180kg
Accessories
Shelfplate	Stainless steel, 2 pcs.				Stainlesssteel,4pcs.	Stainlesssteel,8pcs.
Shelfbracket	4pcs.(1 pair - 2 pcs. is fixed)				8 pcs.(Sameasleft)	16 pcs.(2pairsare fixed)
OptionalAccessories
Stand /Fittingforstacking / Additional shelf plate / Cable hole / Righthingedtypedoor / External communication terminal(RS485) /Adapterforexternal communication / Temp. output terminal (4 to20mA) /Timeup out-put terminal / Out-put terminal foralarmdeviceetc.

• The performance shown hereisthevalue under the condition of the ambient temperatureof23°C±5°C,humidity of 65%RH±20%.
• The projection is notincludedforInternal dimensions and External dimensions.